Video Transcript for Review of Blue Ox Coupler for Blue Ox Allure Tow Bar - BX88248

Hi, everyone, Steven here with etrailer.com. Today, we're looking at the coupler for your Blue Ox Allure Tow Bar. It's gonna be for a two-inch ball. Now, folks, this ball coupler is gonna fit the Blue Ox Allure Tow Bar. You've got a couple of bolt holes here all the way through. You'll use the existing hardware that's on that current Allure tow bar, and then you're gonna replace that lunette ring with this two-inch coupler onto the tow bar.

So, again, this is gonna work with two-inch balls. I happen to have one here just for demonstration purposes only. Now the two-inch ball, because this is a Demco-branded coupler here and it's an auto-latch coupler, there's no need to pull this up to load this or anything. You simply drop it on the ball and it automatically will go in place and do everything. And then, to remove it, of course, then you pull it up to release the ball.

So, again, just simply put it on the ball. Release it to take it back out. So all the necessary hardware comes with it. You can see it's already bolted on out of the box to the nice heavy-duty steel piece here. Everything that's steel has a black powder coat finish.

The rest of it has a zinc plate on it to keep it all from rusting, corroding, that kind of thing. It's 10,000 pounds rated here on the coupler head and everything, and again for a two-inch ball. Now let's give some quick dimensions for you. Center to center on the two holes here, I got right at about 1 1/2 inches on center. And then, if we go from the back to the very front lip of this coupler, I got right about 13 3/4 inches long overall.

So I'll show you that from your side. So, again, from the lip here all the way back to the back, I got about 13 3/4 inches long overall. Well, folks, that should wrap it up for our quick look together today. Again, this is the coupler for the Blue Ox Allure Tow Bar Two-Inch Ball. I'm Steven, thanks for watching.